Warnings & Safety Rules

Failure to follow these instructions may result in serious injury to the patient or operating staff.

Danger! Possible explosion hazard if used in the presence of flammables.

Only permit trained personnel to use this equipment.

​

Do not connect the equipment to the mains supply until all the instructions have been studied.

​

Always check that the voltage stated on the identification plate corresponds with the electrical supply.

​

Carefully inspect all equipment and accessories before use. Do not operate the equipment if it appears damaged or incorrectly installed.

Always test the equipment prior to use, and check for malfunction or rapid temperature rise. Do not use suspect or damaged equipment.

​

Always use eye protection when cutting to prevent injury from flying debris.

​

Always ensure that no loose articles can be caught by the moving parts of the equipment.

​

Always disconnect the equipment from the electrical supply when cleaning, changing accessories or when not in use.

​

Always allow the equipment to stop before removing from the cutting site.

​

Do not immerse the equipment in fluids.

​

Do not drop the equipment.

​

Do not operate this saw with wet hands.

System Assembly

Mains Supply Lead

If an unsuitable plug is fitted to the mains lead, remove and destroy this plug before disposal.

The wires in the mains lead are coloured in accordance with the following codes:

​

Blue – Neutral (230V)  Or  White – Neutral (100-120V)

Brown – Live (230V)    Or  Black – Live (100-120V)

Note: If a fused plug is fitted, a 3-Amp fuse should be used to protect the instrument.